CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

I need help whit a error and heat transfer..

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 4, 2007, 09:15
Default I need help whit a error and heat transfer..
  #1
Victor
Guest
 
Posts: n/a
Hi all,

Anyone could help me?

I check the mesh in Fluent and appear:

WARNING: non-positive volume exist WARNING: Grid check failed (I have hexagons in a circular pipe)

I don't know how work this program in heat transfer… For the wall is a "Heat transfer Coefficient", this coefficient is "Global (U)" or of the medium ("h" of water for example)? The "free stream temperature" is of the medium too? Must I turn on "Shell Conduction" and "Heat Generation Rate"?

The parameter for "pressure outlet" as "Backflow Total Temperature" and "Turbulence Specification Method" must I it determinate?

Nice when somebody could help me. Thanks!

Victor

  Reply With Quote

Old   September 4, 2007, 09:29
Default Re: I need help whit a error and heat transfer..
  #2
rosol
Guest
 
Posts: n/a
I think your dimensions is small and the size of divisions also small therfore the element volumes result in your mesh is very small since fluent have minimum value of element volume .Try larger values of divisions

Good Luck
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 10:40.