CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Problems in Meshing Cyclone (http://www.cfd-online.com/Forums/fluent/46044-problems-meshing-cyclone.html)

Sal September 16, 2007 10:13

Problems in Meshing Cyclone
 
Hello,

Can any one help me on meshing a geometry of a cyclone, I am having problems with generating a good quality mesh. I have the gambit ver 2.3 file. Thank you in advance

Sal

fpingqian September 16, 2007 21:20

Re: Problems in Meshing Cyclone
 
Can you tell us the position that has problems?

chandra manik September 17, 2007 05:39

Re: Problems in Meshing Cyclone
 
First u have to mesh the cylone skin make it quet smooth do not to coarse, then mesh the volume, gambit will mesh your volume automaticaly refer to cyclone skin meshing


Sal September 19, 2007 10:21

Re: Problems in Meshing Cyclone
 
I the cyclinderical part of the cyclone which also has the inlet section. It does not allow me to mesh it properly and the velocity profiles that I obtain are completley different to the ones what people have reported before.


All times are GMT -4. The time now is 20:50.