CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

TWO PHASES WITH EVAPORATING

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 19, 2007, 10:38
Default TWO PHASES WITH EVAPORATING
  #1
Bohis
Guest
 
Posts: n/a
Hi,

I would like to know if somebody has some experiences with this: Imagine, you have chimney and some gass flowing in. Its temperature is quite high. You will inject water droplets in particular place. Droplets will be evaporated. And you are interested in droplets behaviour.

Do you have any idea how to solve it? Which model use. Is it ever possible?

thanks in advance!
  Reply With Quote

Old   September 19, 2007, 14:48
Default Re: TWO PHASES WITH EVAPORATING
  #2
Joe
Guest
 
Posts: n/a
Is it ever possible?

yes
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is Geo reconstruct scheme available for only 2 phases? sachinthakre Fluent UDF and Scheme Programming 2 September 17, 2013 13:49
Extract primary phase thread in VOF with 3 phases Eric FLUENT 2 July 7, 2011 02:22
Explicit method for more than two phases sachinthakre FLUENT 1 February 17, 2011 13:07
question about Heat transfer between two phases with VOF model sooroo3 FLUENT 0 February 15, 2011 04:24
Drawing velocities of phases separately K. Baker FLUENT 0 June 10, 2007 08:40


All times are GMT -4. The time now is 07:21.