Home > Forums > FLUENT

making line surface in fluent

Mark Forums Read

Reply

October 6, 2007, 02:59	making line surface in fluent	#1
rosol Guest Posts: n/a	Hi all, I have to modelling circular channel and I need to make or plot a line on the surface of channel but the problem is the options in surface list only for srait sufrace i.e line or plane .what I need is to plotting a arc on the sylender surface in fluent.Plaese help me to do that. Regards

Reply

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
channelFoam for a 3D pipe	AlmostSurelyRob	OpenFOAM	3	June 24, 2011 13:06
define surface or line source from FLUENT	solefire	FLUENT	0	January 30, 2011 05:23
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3	flakid	OpenFOAM Installation	16	December 28, 2010 08:48
Installation OF1.5-dev	ttdtud	OpenFOAM Installation	46	May 5, 2009 02:32
OpenFOAM15 installables are incomplete problem with paraFoam	tryingof	OpenFOAM Bugs	17	December 7, 2008 04:41

All times are GMT -4. The time now is 21:42.