CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

the sign "temperature limited to sth..."

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 21, 2007, 07:18
Default the sign "temperature limited to sth..."
  #1
Kwang
Guest
 
Posts: n/a
I searched many questions about the sign of "temperature limited to sth.." and answers about the questions.

Now, I wanna ask sth about it. If the sign comes up again and again, is the result wrong?

I've been running fluent for a long time and the sign's been coming up whenever it's solved.

And, my result that I'm running now seems not to converge. I set convergence limit at 1e-06 and my result is near to 1e-03

Should I newly run fluent? Or just keep running the result with the sign "temperature limited to sth..."

If it's going wrong, what do I do??

Help me, guys!!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TEMPERATURE LIMITED problem emanuele FLUENT 9 June 15, 2018 11:45
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
temperature limited - absolute pressure limited Asashi FLUENT 3 July 18, 2014 10:51
temperature limited to 1.0e-00 in 10 cells fabolous FLUENT 1 July 14, 2010 14:48
Limited temperature and pressure warnings Shamoon Jamshed FLUENT 0 July 7, 2009 17:20


All times are GMT -4. The time now is 12:11.