CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

incomplete particles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 1, 2007, 05:19
Default incomplete particles
  #1
jack
Guest
 
Posts: n/a
Hi CFD people I face a problem of incomplete particle with DPM iteration. I increase the number of step but it doesnt help that much and become really long to converge. So what could be the reason to get incomplete otherwise? Actually some of my incomplete particule looks like if they are stopping just before a wall ( which is not set up as a trap). Could it be one of the reason that my particule is bigger than the cells next to the wall? I will be pleased to get new advices thank you
  Reply With Quote

Old   November 10, 2007, 03:59
Default Re: incomplete particles
  #2
morteza
Guest
 
Posts: n/a
Hi dear friend, I don't imagine that your incomplete particle is bigger than the cells next to wall, because in these situations Fluent should announce that particle was trapped. I think that your particles are in a circulation region and can't take away from this region.

  Reply With Quote

Old   November 11, 2007, 06:21
Default Re: incomplete particles
  #3
jack
Guest
 
Posts: n/a
you probably right, but on the track particle i dont see the particule movement in the dead zone. It just look like it stop next to the wall without to be trapped. thank you anyway
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to determine the number of particles injected. welch FLUENT 2 January 18, 2024 05:08
trying to simulate two-phase jet flow with particles in surface injection ajkratos FLUENT 5 March 3, 2015 22:33
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM Community Contributions 300 October 29, 2014 19:00
incomplete particles in DPM model elah599 FLUENT 1 June 26, 2011 02:37
particles model ati_ros61 FLOW-3D 3 December 6, 2009 17:03


All times are GMT -4. The time now is 04:24.