Any body familiar with PBM in Fluent

ashar_md2001 · November 8, 2007, 14:23

Hi everyone,

If you are working on PBM in Fluent and would like to exchange info, please send me a message.

Cheers Pirooz

ashar_md2001 · February 6, 2013, 12:01

Hi,
My name is ashar doing my research in Portugal.
I am new to population balance modelling. I am modelling precipitation of barium sulphate

.i.e. (1) Bacl2+ (2) Na2So4------»BaSO4

This study is conducted in T Reactor where two reactant will be fed through the two different inlet and impinge in the center.
Can you please guide me through the problem in order to solve.
Like where should i enter the concentration for example (1) and (2)=0.1.
what will be my Primary phase or Sec Phase. IF i am not wrong I have defined (1) as PP and (2) as SP. or else should i patch the (1) in left side and (2) in right side.
Also in material (1) is not available so therefore I defined water initially then I Changed the Mol. wt. of the component but (2) is available in Fluent database.

Sorry I know I am asking too many questions.
Whatever suggestions you give will be highly appreciated.

November 8, 2007, 14:23	Any body familiar with PBM in Fluent	#1
Pirooz Darabi Guest Posts: n/a	Hi everyone, If you are working on PBM in Fluent and would like to exchange info, please send me a message. Cheers Pirooz ashar_md2001 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent - license problem.	Marcin	FLUENT	3	April 13, 2018 16:33
problem of running parallel Fluent on linux cluster	ivanbuz	FLUENT	15	September 23, 2017 19:12
6DOF with floating body bounce back.	paka	FLUENT	4	June 6, 2013 11:32
Different Results from Fluent 5.5 and Fluent 6.0	Rajeev Kumar Singh	FLUENT	6	December 19, 2010 11:33
Fluent connection with simulink by TCP/IP	Tanktruck	Fluent UDF and Scheme Programming	1	June 28, 2009 12:56

February 6, 2013, 12:01		#2
ashar_md2001 New Member Mohamed Ashar Join Date: Feb 2011 Posts: 13 Rep Power: 15	Hi, My name is ashar doing my research in Portugal. I am new to population balance modelling. I am modelling precipitation of barium sulphate .i.e. (1) Bacl2+ (2) Na2So4------»BaSO4 This study is conducted in T Reactor where two reactant will be fed through the two different inlet and impinge in the center. Can you please guide me through the problem in order to solve. Like where should i enter the concentration for example (1) and (2)=0.1. what will be my Primary phase or Sec Phase. IF i am not wrong I have defined (1) as PP and (2) as SP. or else should i patch the (1) in left side and (2) in right side. Also in material (1) is not available so therefore I defined water initially then I Changed the Mol. wt. of the component but (2) is available in Fluent database. Sorry I know I am asking too many questions. Whatever suggestions you give will be highly appreciated.