I written udf for transport equation for solving charge density. in my udf

1 i solved for voltage using uds0 2 using above uds i solved for electric field define_adjust(domain,t) 3)using 2 I solved transport equation for charge density by using macro define_uds_flux(name,f,t,i)

IF u see this paper they described problem.u can see domain. ***for boundary conditions------------------- AT wire voltage =25kv at collector plate voltage = 0 remaining is symmetry BUT charge density on the wire is not constant. THIS will varry based on electric field. THIS is solved by iteratively . for this i written udf using define_profile() i supplied this profile to on the wire. but i did not got the results. PROFILE IS charge density on wire_new =old_charge+q*(1-alph) alpha is under relaxation q*=Ewire/Eonset Can any body give any advice on this .

hellow is there any one is there to discuss on ehd

[ak6g08]

Hi,

Ive seen this 2 years late but I would like to model EHD in fluent as well...I was wondering if you could give me any advice on how to write the UDF for the charge transport equation, I ask because there is also an ionic drift term...but the general scalar transport equation only has a diffusion, unsteady and convective flux term (and source term if you put one in). Any advice or references that you could point me too I would really appreciate.

Im sorry I cant be of any help

Thanks again
akour

[johnwinter]

Hi all,

If any body has writted UDF for Guass law electric field or particle charge equation. Please share.

john