CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Tgrid Hybrid mesh (http://www.cfd-online.com/Forums/fluent/46707-tgrid-hybrid-mesh.html)

JSM December 3, 2007 07:04

Tgrid Hybrid mesh
 
Hi,

I used Tgrid for volume mesh for my geometry. I tried to mesh with prism layers and hex core in other regions. But I could not achieve this. I altered the parameters in Hexcore control panel. Still I get "hexcore mesh is failed". But prism layers are generated without any errors.

How to get the hexcore mesh?

with warm regards, JSM


red lemon December 4, 2007 19:07

Re: Tgrid Hybrid mesh
 
Check the hexcore tutorials for settings. Make sure the max and min hex sizes are ok for the domain. Check you have created a new domain for the hexcore region from the prism cap.

JSM December 5, 2007 00:03

Re: Tgrid Hybrid mesh
 
Hi redlemon,

I checked the settings and I followed the same steps mentioned in the tutorial. Still I could not mesh with hexcore and prism layers. Any options to overcome this?

I have one more clarification. after making tetra mesh, we can generate prism layers in the same mesh. Is it possible?

Thanks in advance

JSM


All times are GMT -4. The time now is 01:55.