CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Not converged, Help wanted!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 4, 2007, 10:57
Default Not converged, Help wanted!
  #1
xinhui zhang
Guest
 
Posts: n/a
I am using non-premixed combustion model to calculate coal/biomass combustion. However, whenever I turned on P1 radiation model, it is not converged. And a segmentation error is reported. Can someone give me a help?

Xinhui

  Reply With Quote

Old   December 5, 2007, 07:28
Default Re: Not converged, Help wanted!
  #2
hari
Guest
 
Posts: n/a
make all the under relaxation parameters to 0.9 for all the species
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping run when converged. kprzysowagmailcom OpenFOAM Running, Solving & CFD 7 August 6, 2013 08:32
Solution converged, and then diverge again. jrg FLUENT 2 April 1, 2013 23:10
Need help to determine whether Converged eespi002 FLUENT 1 June 29, 2009 09:53
How to import an existing converged soultion into a similar refined mesh? Sophie FLUENT 1 March 22, 2009 23:31
how to identify transient simulation converged littlelz CFX 5 January 27, 2009 19:13


All times are GMT -4. The time now is 17:10.