CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   change coordinate system (http://www.cfd-online.com/Forums/fluent/46886-change-coordinate-system.html)

Nabil December 23, 2007 06:12

change coordinate system
 
Hi! Please can you help me? How to change on Fluent, the coordinate system from the Cartesian to cylindrical one. for a '3D' problem. Thanks nabil


cfd_newbie December 24, 2007 23:15

Re: change coordinate system
 
There is no such an option in Fluent, for 3D you could use only the Cartesian coordinates :).

If your problem is symmetrical about one of the axes, you could use in Fluent 2d the Axisymmetrical option in Define->Models->Solver.


Marcus081 February 12, 2010 12:23

Coordinate System Components (v, w, x) ?
 
1 Attachment(s)
Hi, I have been using the version of ansys 12.1, and the coordinate system appears with these component (v, w, x) , I have not found the form to change it a (x, y, z), since I can do it?


All times are GMT -4. The time now is 16:57.