CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to make Disproportional Figures - Postprocess. (http://www.cfd-online.com/Forums/fluent/46903-how-make-disproportional-figures-postprocess.html)

mrt December 28, 2007 06:25

How to make Disproportional Figures - Postprocess.
 
Dear All,

My geometry is a rectangle with Length = 10 m , Width = 0.2 m. I would like to show the whole geometry in one figure but disproportionally to see the wall better. Let's say L/W = 10/0.2 = 50 (in real case), I would like to change it to L/W=5 in figure. Does anyone have an idea how to do it in Fluent?

Regards,


al_c December 28, 2007 14:54

Re: How to make Disproportional Figures - Postproc
 
Try to use Display->Scene...(in the 'Names' field select plot which you need to transform) -> Transform button -> Scale parameter.

mrt December 29, 2007 09:13

Re: How to make Disproportional Figures - Postproc
 
Thanks a lot..... :)



All times are GMT -4. The time now is 15:34.