CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

PCM solidification

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 2, 2008, 04:37
Default PCM solidification
  #1
sudhir
Guest
 
Posts: n/a
hello frnds,

im doing a project on solidification of phase change materials(PCM) .generally pcm have different densities on different temperature.is it possible to solve this kind problem using fluent??

thanks
  Reply With Quote

Old   January 2, 2008, 10:05
Default Re: PCM solidification
  #2
qayum
Guest
 
Posts: n/a
you can give properties using piece wise lenier option there u can give properties according temperature. for this u need properties of fluid with respective temperatures.

qayum
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PCM melting inside the Al cavity shoxan FLUENT 1 August 9, 2018 03:12
How can I make the solid PCM to sink to the bottom as it melts? Lim FLUENT 6 December 22, 2014 03:29
About the solidification? H.P.LIU Phoenics 1 December 1, 2010 10:49
use k-epsilon model for solidification 4mr1 CFX 0 July 6, 2010 06:49
PCM solidification sudhir FLUENT 0 January 2, 2008 04:36


All times are GMT -4. The time now is 22:21.