|
[Sponsors] |
January 7, 2008, 09:02 |
divergence in AMG solver
|
#1 |
Guest
Posts: n/a
|
I'm doing a 3D transient simulation of a compressor (with non iterative time advancement) I get an error after 18599 iterations: "divergence in AMG solver: temperature". What is quite strange is the moment at which it happens: 18599 because at the 18600th, it normally needs to write my .cas and .dat file (every 200 timesteps). I don't know if it is casuality but in all the cases: can someone help me on the problem?
|
|
January 22, 2008, 05:04 |
Re: divergence in AMG solver
|
#2 |
Guest
Posts: n/a
|
please send me cause of divergence and how we can solve this problem.
|
|
February 8, 2008, 18:19 |
Re: divergence in AMG solver
|
#3 |
Guest
Posts: n/a
|
One cause is negative cell volumes. Try grid->check. Look for a negative volume, if so there's your problem and you must re-mesh with much better quality elements.
Carlos. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Divergence detected in AMG & FMG solver..... | devesh.baghel | FLUENT | 2 | July 30, 2018 23:39 |
Error: Divergence detected in AMG solver | siri | FLUENT | 8 | March 12, 2018 18:08 |
Error: Divergence detected in AMG solver: species-0 -> Increasing relaxation sweeps | ksiegs2 | FLUENT | 2 | June 18, 2012 12:26 |
Divergence detected AMG solver error | Rub Nawaz Khalid | FLUENT | 2 | August 14, 2010 12:01 |
divergence in AMG solver | Aly | FLUENT | 1 | November 11, 2004 14:00 |