CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Reading and Writing Boundary Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 20, 2008, 10:19
Default Reading and Writing Boundary Conditions
  #1
chen
Guest
 
Posts: n/a
Hi,

I'm using Fluent 6.3 and I want to apply the same boundary conditions for different cases. In my simulations, I am just varying the mesh and not the model or conditions.

How do I do that? I read that I could go to file -> write-bc, but there's no such option for me!!

Help!

Many thanks!!

Chen
  Reply With Quote

Old   January 20, 2008, 16:41
Default Re: Reading and Writing Boundary Conditions
  #2
Deepak
Guest
 
Posts: n/a
Try writing a journal file, and running it in TUI...so in that case , u just have to read different mesh file thats all, everything else will be taken care by the journal file..

for more help, try http://cfd-online.com/Wiki/Fluent_FAQ
  Reply With Quote

Old   January 20, 2008, 22:11
Default Re: Reading and Writing Boundary Conditions
  #3
chen
Guest
 
Posts: n/a
Hey thanks for your quick reply. I'll try it out and get back to you.

Thanks.

chen
  Reply With Quote

Old   January 21, 2008, 16:17
Default Re: Reading and Writing Boundary Conditions
  #4
Glenn
Guest
 
Posts: n/a
You can file --> write_bc from the text interface (TUI) only. In the text window, type: File then hit enter.... you should see multiple options. You want to write a boundary condition file, so type: write_bc

Yoiu then specify the file name you want for the boundary condition file (or it will default to the name "bcon"
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation Fault in fluent3DMeshToFoam cwang5 OpenFOAM Bugs 23 April 13, 2011 15:37
solid to fluid heattransfer with chtMultiRegionFoam nakor OpenFOAM 11 March 21, 2011 09:28
TGridFluent mesh with internal by prism layer and internal face for diagnostic sponiar OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 March 30, 2009 15:02
COUPLING BOUNDARY CONDITIONS UNDER WINDOWS Jiri Novak FLUENT 3 July 25, 2005 11:04
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 08:19.