CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Without Inlet and outlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 25, 2008, 15:34
Default Without Inlet and outlet
  #1
chetan
Guest
 
Posts: n/a
Is it possible to solve a problem without Inlet and outlet boundary condition in fluent? Only walls rotational condition is there.

If anybody has knowledge of StarCD, Please share there view about this and possibility in StarCD also.

  Reply With Quote

Old   January 27, 2008, 02:46
Default Re: Without Inlet and outlet
  #2
Ramesh.K
Guest
 
Posts: n/a
Hi,

If u can describe ur problem then suggestions can be made. ur question is too broader to answer, any way u need to specify the boundary conditions at the boundaries not necessarily inlet or outlet.

please specify ur problem more clearly

bye
  Reply With Quote

Old   January 27, 2008, 09:41
Default Re: Without Inlet and outlet
  #3
chetan
Guest
 
Posts: n/a
Thanks for reply.

This is small domain near to gears which is engaged and fully submerges in oil. Due to rotation of gears fluid would shear and splash out from both sides. But both sides are inside Fluid domain. I tried this by giving Atm. Pressure inlet and no outlet. But solution is not converging. Please advise

  Reply With Quote

Old   January 28, 2008, 03:22
Default Re: Without Inlet and outlet
  #4
Ramesh.K
Guest
 
Posts: n/a
Hi, if you are trying to model only the space with in the gears you can use pressure outlet if you can predict the pressure or if you dont konw any thing you can simply specify the outflow boundary condition at the openings in fluent.

working on 2d problem or 3d

hope this will help you

bye

  Reply With Quote

Old   February 11, 2008, 13:45
Default Re: Without Inlet and outlet
  #5
Gitesh
Guest
 
Posts: n/a
Hi Chetan,

You can let me know the problem in little more detail, what results you want to check without Inlet or outlet and if you can share your contact details, i will check and revert on receipt of your problem details.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mass flow inlet and pressure outlet issue nikhil FLUENT 5 December 11, 2013 13:30
Pulsatile pressure inlet with pressure outlet a.lynchy FLUENT 3 March 23, 2012 14:45
steam flow in a pipe driven by a pressure gradient between inlet and outlet SalvoCalvo Main CFD Forum 0 March 11, 2010 07:52
VOF Outlet boundary condition in cfd - ace JM Main CFD Forum 0 December 15, 2006 09:07
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 06:13


All times are GMT -4. The time now is 11:28.