CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

how to reduce negative voulmes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 29, 2008, 12:03
Default how to reduce negative voulmes
  #1
somasekhar.m
Guest
 
Posts: n/a
I written c-code for rotoray componet of wankel engine, which dynamically links the fluent solver, which enhance the standard features of the solver. i have done unstructured grid for the housining. after, not even 1 sec the solver shows the negative volume detected...? what exactly it mean ? how to minimize the negative voulme.? please can anybody help in this regard.

Somasekhar.m

  Reply With Quote

Old   February 5, 2008, 12:24
Default Re: how to reduce negative voulmes
  #2
hassan kassem
Guest
 
Posts: n/a
may be your mesh very fine so the first point of your grid is smaller than your geometry tolerance so fluent see this volume with negative value. so you need to rebuild your grid with a smother geometry or with courser mesh
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 13:06
blockMesh error ... balkrishna OpenFOAM Pre-Processing 0 August 17, 2010 02:39
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00


All times are GMT -4. The time now is 14:11.