CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

mixture model for rotating bowl

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 30, 2008, 02:37
Default mixture model for rotating bowl
  #1
garima chaudhary
Guest
 
Posts: n/a
hi all

I want to send a dispersion to the rotor(rotating cylinder) i.e. a continuous phase containing a dispersed phase is to be send at the bottom centre mass inlet to the rotor.My geometry is 2-d axisymmetric swirl. Now if i want to send a dispersion in the rotor i think its appropriate to use mixture model. can i use mixture model for this system where the rotor is rotating at 250rad/sec and the inlet to this rotor consists of water as continuous phase and ccl4 as dispersed phase, and the rotor is open to the atmosphere at the top. in my model i am using droplet size of ccl4 is 30 microns in continuous phase water and the massinlet rate for water is .005kg/sec and ccl4 is .002 kg/sec

I tried this model but getting divergence. I am using simple scheme for pressure velocity coupling and presto for discretization.

I will be highly obliged if you kindly help me out in resolving this issue

regards garima

  Reply With Quote

Old   January 30, 2008, 19:24
Default Re: mixture model for rotating bowl
  #2
Usman Chaudary
Guest
 
Posts: n/a
Sorry which model did you use? Try 2nd order upwind scheme. Thats more robust.

Usman Chaudary
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent's Mixture model in CFX FLuentSwitch CFX 14 December 27, 2014 10:15
A question about UDF utility in mixture and multiphase model aleisia Fluent UDF and Scheme Programming 0 June 7, 2011 16:32
species transport model or mixture model?HELP zhhjll FLUENT 3 March 5, 2011 16:27
Mixture model for Multiphase flows sandisk FLUENT 0 January 23, 2011 19:05
MULTIPHASE - FREE SURFACE & MIXTURE MODEL Aris FLUENT 3 April 28, 2009 11:46


All times are GMT -4. The time now is 05:20.