CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Simulation of Water Flow through a Venturi Meter (http://www.cfd-online.com/Forums/fluent/47175-simulation-water-flow-through-venturi-meter.html)

Hassan A January 30, 2008 08:41

Simulation of Water Flow through a Venturi Meter
 
Hello All,

Having some problem calculating and comparing the pressure difference upstream and downstream of the venturi plate. Please, any advice?

Ramesh.K January 30, 2008 10:04

Re: Simulation of Water Flow through a Venturi Met
 
Hey Describe ur problem then only you can expect help


balazs1111 April 7, 2010 06:00

question
 
I have similar problem with the pressure difference. I have a pipe something like this:

......_______________
.....|......|........|.
inlet|......_........|.outlet
.....|_____/ |_______|.


I have everything, the size of the model, the 2d mesh, the property of the fluid, flowrate etc...
After running the simulation in FLUENT, how can I calculate the pressure difference 25mm upstream and downstream of the plate?
What are the 25mm upstream and downstream of the plate?
Thanks for any answer


All times are GMT -4. The time now is 20:51.