CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

DPM - Any Ideas Please?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 3, 2008, 20:50
Default DPM - Any Ideas Please?
  #1
Carlos
Guest
 
Posts: n/a
Hello,

I am modelling the airflow in and around a hollow box with holes in the side. I have used the Discrete Phase Model to seed the flow with inert particles. It is possible to display particles released from a surface and show the residence time i.e. how long it takes for each particle to travel through the domain.

This is all good but I am stuck with something. I need to find a way of displaying the residence time per particle for it to EXIT THE BOX and NOT the domain. Is there a way with DPM that you can show statistics say in a histogram or data file for particles in just one subvolume of the domain?

I need fluent to track each particle (as it does in the graphics) but to stop them moving once they reach a boundary of the internal air volume and then display the residence time. Any help or advice would be much appreciated. This is a relatively simple thing I want to do but as always its knowing how! Please help.

All the best,

Carlos.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM Conservation Equations Help sgelman FLUENT 0 July 14, 2010 14:27
DPM modeling Mohsin FLUENT 0 March 31, 2010 22:11
DPM - do the particles affect the liquid? Nikhil Dani FLUENT 0 January 1, 2009 12:58
slow after mesh for enhanced wall treat DPM joshkemp FLUENT 0 May 1, 2007 17:20
Input Geometry from Ideas to Gambit Knick FLUENT 2 December 11, 2002 04:59


All times are GMT -4. The time now is 14:58.