CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   convergence issue (http://www.cfd-online.com/Forums/fluent/47309-convergence-issue.html)

carno February 13, 2008 04:13

convergence issue
 
Hi All/Carlos (Carlos, I read your previous reply),

Problem: Fluid: diesel Geometry: Injector with one inlet and 2 outlets. Nozzle diameter 0.5mm. BC: Inlet pressure 5 Bar, Outlet pressure: atm. Mesh sensitivity: Three different meshes. One is 100% hexa.

The run is not converging at all. I have tried to ramp up the BC gradually but no success yet. I have used the most basic models, still no success.


All times are GMT -4. The time now is 03:35.