CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

convergence issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 13, 2008, 04:13
Default convergence issue
  #1
carno
Guest
 
Posts: n/a
Hi All/Carlos (Carlos, I read your previous reply),

Problem: Fluid: diesel Geometry: Injector with one inlet and 2 outlets. Nozzle diameter 0.5mm. BC: Inlet pressure 5 Bar, Outlet pressure: atm. Mesh sensitivity: Three different meshes. One is 100% hexa.

The run is not converging at all. I have tried to ramp up the BC gradually but no success yet. I have used the most basic models, still no success.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convergence issue with continuity equation Jake FLUENT 8 June 6, 2018 04:41
Force can not converge colopolo CFX 13 October 4, 2011 23:03
convergence and off wall spacing issue josip76 FLUENT 0 June 4, 2011 19:13
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 02:17
Convergence issue in SST for Porous model Raj CFX 0 May 2, 2008 03:43


All times are GMT -4. The time now is 09:32.