CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Model selection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 28, 2008, 00:06
Default Model selection
  #1
Rashmi
Guest
 
Posts: n/a
Hi

Iam simulating stationary fluid in a closed cylinder. left wall is hot and maintained at 310K and right wall at 28K. the curved wall is adaibatic. I want to determine surface heat flux on hot wall. which model do i use to simulate this problem.

Thx
  Reply With Quote

Old   February 28, 2008, 06:07
Default Re: Model selection
  #2
jesse
Guest
 
Posts: n/a
define/Boundary/wall/thermal
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Low Reynolds k-epsilon model YJZ ANSYS 1 August 20, 2010 13:57
species transport model or mixture model? achaokaoyan Main CFD Forum 0 July 10, 2010 10:52
Viscous Model Selection Jeff FLUENT 0 November 2, 2008 19:12
simulation results for k-w model and SST model Li CFX 7 June 29, 2007 04:19
Thermal radiation model selection and application Jason Phoenics 14 November 18, 2005 06:21


All times are GMT -4. The time now is 17:52.