CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Dynamic meshing at phase interface

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 3, 2008, 13:55
Default Dynamic meshing at phase interface
Posts: n/a
Hello, I'm hoping someone out there with more expertise than me can help out. As my undergraduate thesis I am modelling the generation of micro water droplets in a t-junction (200 micro newton square channel with a 50 micro newton diameter water inlet). I have managed to create this model and am now in the process of refining the model. My main aim at the moment is to refine the interface between the water and cross flowing oil however as the interface region is changing throughout the simulation, therefore the region that requires refinement is constantly moving. Is such a dynamic mesh refinement process possible using FLUENT and if so can someone point me in the right direction?

Any help will be greatly appreciated.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Dynamic Meshing of a 2D Airfoil Anonymized_JL1 ANSYS Meshing & Geometry 65 October 11, 2012 04:22
[GAMBIT] Dynamic Meshing of a combustion chamber donarundas ANSYS Meshing & Geometry 1 December 2, 2009 08:13
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Issues with dynamic meshing sridhu88 FLUENT 1 June 11, 2009 16:46
dynamic remeshing of interface john FLUENT 0 November 2, 2006 01:47

All times are GMT -4. The time now is 05:57.