CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Axial, Radial, Tangental velocity in FLUENT post (http://www.cfd-online.com/Forums/fluent/47505-axial-radial-tangental-velocity-fluent-post.html)

Barri March 4, 2008 05:51

Axial, Radial, Tangental velocity in FLUENT post
 
Hi,

I used SRF to model a compressor. I would like to show the axial, radial, tangential velocity on an iso-surface. Does anyone know how to show it in FLUENT post.

Thanks a lot!


SA March 5, 2008 11:39

Re: Axial, Radial, Tangental velocity in FLUENT po
 
simpley go to contour menu

Hirdesh March 6, 2008 21:29

Re: Axial, Radial, Tangental velocity in FLUENT po
 
1st create iso-surface in axial, radial and tangential at desired level. then go to contour menu. select velocity-velocity magnitude. then "from surface"-selct axial, radial or tangential option, as u create n want to plot.


All times are GMT -4. The time now is 09:33.