CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Urgent help on backflow turbulence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 5, 2008, 21:00
Default Urgent help on backflow turbulence
  #1
Remy
Guest
 
Posts: n/a
Hi Friends,

I'm using the k-w turbulence model when simulating my centrifugal compressor. i'm also using "K and Omega" as my turbulence specification method, however i'm unsure of the value to input into Turb. KE and Spec. Dissipation rate at my pressure inlet and also the Backflow Turb. KE and Backflow Spec. Dissipation rate at my pressure outlet. If i want to assign the outlet with turbulent viscosity ratio of 100 times than that of the inlet (laminar), what i suppose to do?

Thanks a million for ur help!

Remy
  Reply With Quote

Old   March 5, 2008, 23:47
Default Re: Urgent help on backflow turbulence
  #2
balashowry
Guest
 
Posts: n/a
sir,

where Can I get tutorials of 2.0 gambit please help me.

Thankyou.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence postprocessing Mohsin FLUENT 0 September 19, 2011 21:05
Discussion: Reason of Turbulence!! Wen Long Main CFD Forum 3 May 15, 2009 09:52
urgent : turbulence abhay FLUENT 0 October 15, 2008 02:23
Backflow Turbulence Intensity & viscosity ratio? Remy FLUENT 0 March 7, 2008 05:50


All times are GMT -4. The time now is 02:12.