CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Fluent error in closed tube analysis (http://www.cfd-online.com/Forums/fluent/47628-fluent-error-closed-tube-analysis.html)

Derek March 15, 2008 13:03

Fluent error in closed tube analysis
 
Hi all,

I keep recieving and error and after searching have found nothing to support it, although it seems like a very simply overcome error. It states "Flow Boundary Zone is adjacent to a solid zone" The zones it's referring to are the the outlet of a closed tube flow set as outflow and the zone that comprises a solid wall in my case. Let me konw if anyone needs more information. Thanks all.

-Derek

JSM March 16, 2008 23:28

Re: Fluent error in closed tube analysis
 
Hi Derek,

This error may be due to mistakes in simulation set up. Are you doing multiphase simulation? Give some hints about your simulation setup.

with regards, JSM

Vinod Dhiman March 17, 2008 06:44

Re: Fluent error in closed tube analysis
 
Hi

I couldn't exactly understand what you mean by "outlet of a closed tube flow set as outflow" because if it is closed how it could be outflow and if it supposed to be outflow it should not be outflow.


All times are GMT -4. The time now is 23:34.