CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Simulation of microencapsulation PCM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 22, 2008, 08:23
Default Simulation of microencapsulation PCM
  #1
rosol
Guest
 
Posts: n/a
Hi all,

my work is to simulate the flow and heat transfer in slurry consists of water and some percentage of phase change materials in microchannel.when this slurry or suspension enter to the channel is heated and these microencapsulated phase change materials is melted.my problem is I dont know how to introduce the value of volume fraction percentage of PCM in the slurry in fluent to tell fluent that the fluid is not PCM in all but it contain a percentage of PCM in water .

Please any one have an information about how to simulate this suspention and how to process the melting of the microencapsulated PCM in fluid and entering its value of volume fraction in fluent to help me .

Looking for your replay and help

Regards

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 05:14.