CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Mesh problem?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 26, 2008, 00:12
Default Mesh problem?
  #1
Jake
Guest
 
Posts: n/a
Hello, I am new to gambit (and fluent), and trying to modify previously created model.

Here's what I have done so far. I have saved the previous gambit file under a new name, and have modified a few features of it to satisfy the need, and am trying to mesh it pretty much the same way that it was done before.

Is there a way to duplicate the same type of mesh? I mean, is there a way for finding out what type of scheme the previous person used to create that previous mesh? and duplicate it?

Thank you.
  Reply With Quote

Old   March 26, 2008, 09:55
Default Re: Mesh problem?
  #2
Daniel Tanner
Guest
 
Posts: n/a
If you open their Gambit session ".dbs" you might find the information there. If you just have the output file (".msh") you cannot.

If it is a uniform mesh (i.e. no size functions or mesh inflations) you could try meshing the geometry with different element sizes until you have a volume mesh with a similar (or the same) number of volume elements.
  Reply With Quote

Old   March 26, 2008, 19:05
Default Re: Mesh problem?
  #3
red lemon
Guest
 
Posts: n/a
read through the saved journal file (*.jou). This contains a list of commands issued and can be re-run.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D mesh problem sphinx FLUENT 0 July 24, 2008 13:26
Problem with mesh msg30 OpenFOAM Running, Solving & CFD 2 May 7, 2007 14:03
Mesh problem abdou FLUENT 0 March 22, 2005 04:42
mesh problem in 3D abdellah FLUENT 0 March 15, 2005 05:30
CFX Mesh problem Atit Koonsrisuk CFX 4 October 5, 2004 09:14


All times are GMT -4. The time now is 15:55.