CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Tablular values as input to UDF

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 30, 2008, 18:59
Default Tablular values as input to UDF
  #1
BS
Guest
 
Posts: n/a
Hi Fluent users: Is it possible to create a UDF that will accept external input from a file (a table)? For example, if i wish to supply value of momentum source for each cell in the mesh at each time step by reading from a table whose structure may be a matrix. Any suggestions would be helpful. Thanks

FYI: I had previously posted a detailed message which is available here: http://www.cfd-online.com/Forum/fluent.cgi?read=56768

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ensight - node values -cell values leo FLUENT 1 May 12, 2010 08:47
node values or cell values? aPpA FLUENT 0 November 10, 2006 09:56
How to input Magnetic Field values in ESTER Code? Amit Gupta Phoenics 0 September 21, 2006 13:38
TABLE INPUT LORENZO CD-adapco 0 June 9, 2004 12:04
KIVA input Olmi Main CFD Forum 0 September 25, 1998 11:04


All times are GMT -4. The time now is 01:32.