Doubt in Operating Pressure
 

Hi i am solving transient analysis in inlet manifold, in that i have one doubt during the suction stage the pressure will be in negative, so in operating conditions panel what pressure input i have to give whether 1 bar or some thing else.... Thanks in advance

Re: Doubt in Operating Pressure
 

Hi pooja,

As you said outlet pressure is negative (during suction), lets outlet pressure is -0.5 atm, So in this case you must enter 1 atm as operating condition.

just try it, If I am correct.

byeeee

Re: Doubt in Operating Pressure
 

Hi Dev, S i will do it.... Thanks for ur reply.....