CFD Online Logo CFD Online URL
Home > Forums > FLUENT

boundary conditions for the fluid in the rotor

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 9, 2008, 07:48
Default boundary conditions for the fluid in the rotor
Muhammad Qureshi
Posts: n/a

I am modeling a 3D rotor with tip clearance. I have specified 'Moving Reference Frame' for fluid-rotor, (as the rotor is rotating). Should I also specify 'Moving Reference Frame' for fluid in tip-clearance region.

Many Thanks,
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
NASA Rotor 37 Boundary Condition Problems Dom FLUENT 1 March 27, 2012 07:00
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
Boundary conditions at Fluid Solid interface (CHT) michelle CFX 1 April 21, 2008 04:06
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 07:18
two-fluid boundary conditions Wouter FLUENT 1 March 27, 2006 19:18

All times are GMT -4. The time now is 12:02.