CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

meshing jet case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 15, 2008, 15:15
Default meshing jet case
  #1
Jessica
Guest
 
Posts: n/a
I'm having trouble meshing a jet case that I'm working on. The problem is that I need to include a really large area around the jet (relative to the jet/nozzle size)- about 20D by 50-100 D. I was able to get a good mesh for one nozzle, but now I am usign several nozzles, which exacerbates the problem because I need to mesh the space between the nozzles and because the jet formed by the nozzles is larger. I need to have a fine mesh in the nozzles, a finer mesh in between, and a coarse mesh far away from the jet.

To make a long story short, I was wondering if anyone could suggest a way to mesh a case where both large and small geometries are present? The mesh needs to be very fine in some areas, but I would like it to be coarse in other ares to prevent the case from being too large. I am having trouble doing this using a structured mesh in Gambit.
  Reply With Quote

Old   April 15, 2008, 17:31
Default Re: meshing jet case
  #2
AAA
Guest
 
Posts: n/a
Hi

Have you tried using Size Function? It works very well with such complex geomentries.

Also, you should consider sub-dividing the domain into smaller zones in order to have better control over the meshing procedure.

Regards

AAA

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hexa meshing or Tetra meshing??? NITIN DEWANGAN CFX 5 August 5, 2008 09:59
Cloning a case or creating a new case for 16 processes mellanoxuser OpenFOAM Running, Solving & CFD 0 February 8, 2008 17:52
Problem seeing new case in case browser alan_fergus OpenFOAM Pre-Processing 9 June 22, 2006 03:46
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 11:08


All times are GMT -4. The time now is 02:21.