CFD Online Logo CFD Online URL
Home > Forums > FLUENT

dpm model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 16, 2008, 02:18
Default dpm model
Posts: n/a
Hello everyone ,who know how to get the dpm flow from fluent. for example,solid phase and gas flow from A pipeline to B and c to get the b pipeline solid phase flow rate ?
  Reply With Quote

Old   April 16, 2008, 06:30
Default Re: dpm model
Posts: n/a
If you are introducing the solid phase as injections, after you solve/dpm then use the command rep dpm-summ This should give you the mass flow of the species and also the heat balance.

The commands should be used in successions - if you do something like saving the case, plotting contours, the report of the dpm is lost and you can't get the report then.

Hope this helps
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Population balance model for twofluid model pierre OpenFOAM Running, Solving & CFD 7 March 26, 2014 03:39
Surface Reaction Model or Heterogeneous Rxn Model? satheeskannan FLUENT 0 September 2, 2008 18:55
changing model constants in k-e turbulence model Sunil CFX 3 October 3, 2006 12:12
Symmetry model half or total geometrical model in LES vvqf OpenFOAM Pre-Processing 3 March 22, 2006 10:06
Copying boundary conditions from model to model Lior FLUENT 3 September 23, 2004 16:10

All times are GMT -4. The time now is 10:06.