CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 16, 2008, 04:56
Default Help!
  #1
oulri26
Guest
 
Posts: n/a
Hello everybody, I am a PHD student at the moment and I need to make a program in FLUENT very fast, but I don't really know the UDF-s. Here is my 2D problem: there is a plane plaque with a length of 150mm and 1mm in thickness; the initial conditions are: - Plaque temperature: Tp (e.g.: 300K) - Fluid temperature: Tfe (e.g.: 295K) - Initial fluid speed: v=0m/s.

In order to make a cycle, I have to accomplish 4 stages:

- t=1: the temperature of the plaque increases uniformly in the whole plaque with 2K (e.g.: Tp = Tpinitial +2K = 302K);

- t=2: the fluid flows from left to right for a certain period of time t (e.g.: t=1s) with a speed v=0.2m/s. There is a temperature gradient that appears both in the fluid and in the material. The temperature of the fluid at the right end of the plaque is Tf = Tfs

- t=3: the fluid has again a speed v=0m/s and the plaque has her temperature diminished uniformly by 2K (the temperature gradient is preserved)

- t=4: the fluid flows along the plaque from right to left this time, with a temperature at the entry point Tfs (the same temperature as the ending point in stage 2) " end of cycle.

I know it's a little bit complicated, but I am really blocked at the moment. I am thanking you in advance for your help.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 11:42.