CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mass flow rate on the Iso-clip surface & interior

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 22, 2008, 10:29
Default mass flow rate on the Iso-clip surface & interior
  #1
Sunil Gupta
Guest
 
Posts: n/a
Hello,

I want to break the interior surface into different sections to get mass flow rate in diff sections ...that i can do by using iso-clip surface. I have one interior surface and clip that surface 100% just to validate that watever mass flow rate are same.......that means clipped surface will be same as interior surface....so i clip the interior 100% to name se clip-surface1 and check the mass flow rate...i got surprise to get different mass flow rate for interior surface and 100% clip surface...why does it so happen??..waiting for reply ..thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Surface Integral - Mass Flow Rate Venkatesh V FLUENT 3 October 10, 2008 17:18
mass flow rate of "interior" Dong Fu FLUENT 0 February 1, 2008 12:25
Mass Flow Rate on the Interior Surface Barii.Johnason FLUENT 24 May 11, 2007 18:59
Mass flux and mass flow rate us Phoenics 10 March 31, 2006 03:06
How are the mass flux and mass flow rate defined? Miles Siemens 2 November 7, 2002 09:45


All times are GMT -4. The time now is 04:32.