CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Error about AMG solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 12, 2008, 09:15
Default Error about AMG solver
  #1
wyzh
Guest
 
Posts: n/a
This Error usually occurs when FLUENT is running recently: Error:divergence detected in AMG solverressure correction. And there is nothing unconventional in residual graphics. Why? Which factors may lead to this error?
  Reply With Quote

Old   May 14, 2008, 02:06
Default Re: Error about AMG solver
  #2
Ant
Guest
 
Posts: n/a
The error indicates that the solver has crashed. If the solve crashes within a few iterations of starting the simulation the issue is in the boundary/initial condition.

First make sure the length scales of the model are as required. If you are solving for compressible flow start with a lower mass flow and increase the mass flow to design value in small steps.

More details can be discussed if we know what kind of case you are solving.

Regards, Ananth
  Reply With Quote

Old   May 14, 2008, 22:52
Default Re: Error about AMG solver
  #3
wyzh
Guest
 
Posts: n/a
Thank you! The issue I want to solve is to simulate convective heat transfer in circular tube. An 2d symmetric model is adopted. The mesh close to the wall is fine ,and it's coarse near the axis correspondingly. The solve crashs occur not only at the beginning of iteration , but also after more than one hundred iterations.
  Reply With Quote

Old   May 15, 2008, 09:43
Default Re: Error about AMG solver
  #4
bubua
Guest
 
Posts: n/a
What about level of residuals?
  Reply With Quote

Old   May 22, 2008, 02:40
Default Re: Error about AMG solver
  #5
wyzh
Guest
 
Posts: n/a
What is "level of residuals",and how to get it?
  Reply With Quote

Old   May 22, 2008, 07:35
Default Re: Error about AMG solver
  #6
bubua
Guest
 
Posts: n/a
see to resiadual monitor.

  Reply With Quote

Old   May 22, 2008, 08:30
Default Re: Error about AMG solver
  #7
wyzh
Guest
 
Posts: n/a
The level of residual I set is about 1e-08
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FSI Solver error CC CFX 3 October 3, 2008 11:06
Solver Error eros CFX 1 July 4, 2007 08:03
cfx 5.7 solver error hazri CFX 1 March 2, 2005 05:14
CFX 5.7 solver error Neser CFX 9 March 1, 2005 11:59
Error in AMG Solver: help please madasu FLUENT 1 August 16, 2002 07:14


All times are GMT -4. The time now is 06:06.