CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Rotation of a 3d rigid body through its free end

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 20, 2008, 09:56
Default Rotation of a 3d rigid body through its free end
Posts: n/a
Hi, I'ld like to rotate a rigid body through an axis that doesn't pass through its centre of gravity such as a long flap (my case is 3d) rotating about one of its free ends. The DEFINE_CG_MOTION can only be used to specify translational and angular velocities for the body's centre of gravity. It is true, right ?

But if I use DEFINE_GRID_MOTION, this time the body is needed to be non-rigid. Could anybody please help me ? I'm quite confused !!!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rigid body rotation NOT through the CG? Joe FLUENT 6 May 28, 2010 11:03
About rigid-body solution? billpeace CFX 8 April 23, 2006 18:49
rigid body motion antonello FLUENT 3 July 28, 2004 03:25
rigid body code nico FLUENT 0 July 23, 2004 04:25
rigid body simulation nabeel mohsin FLUENT 0 September 4, 2003 02:46

All times are GMT -4. The time now is 06:32.