CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   request advice on Dynamic mesh error!!!!!!!!!!!!!! (https://www.cfd-online.com/Forums/fluent/48307-request-advice-dynamic-mesh-error.html)

samnetmoon May 21, 2008 18:32

request advice on Dynamic mesh error!!!!!!!!!!!!!!
 
Hi all, when i have run my simulation i get this message, what do it mean??!!!

Updating mesh to time 2.45000e-01 (step = 00245)... Warning: storage Wall Grid Velocity not shared by zones 4 and 3.

Error: coalesce_rib_faces: can't interpolate data, zones of different type detected. Error Object: ()

plse it's URGENT.....................

Master312 May 31, 2022 11:04

May this is your answer
 
Quote:

Originally Posted by samnetmoon
;150993
Hi all, when i have run my simulation i get this message, what do it mean??!!!

Updating mesh to time 2.45000e-01 (step = 00245)... Warning: storage Wall Grid Velocity not shared by zones 4 and 3.

Error: coalesce_rib_faces: can't interpolate data, zones of different type detected. Error Object: ()

plse it's URGENT.....................

hello dear
you must change your boundary condition of "walls to interface" in "direction" of your interface. in other words you must change all boundary conditions that slide through "motion wall" to interface and then define them in manual interface. in the last you have all boundary conditions of slider with "interface" mode, "no" part of that.


All times are GMT -4. The time now is 17:15.