CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

solar collector and selective behaviour of glasses

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 4, 2008, 13:05
Default solar collector and selective behaviour of glasses
  #1
fabrizio del dongo
Guest
 
Posts: n/a
hallo, I'am modelling a building with an air solar collector. I am using the solar ray tracing to have the correct heat flux on the verical surface of the collector facing the south direction. The maximum temperature of the vertical surfaces of the collector is 45°C. The date is the 9th of genuary at 14.00. In my opinon this value of temperature is too low probably because the model isn't able to consider the selective behaviour of glass. Can anyone help me to model the greenhouse effect between the glass and the opaque surface of the collectors? I am using solar ray tracing and rosseland radiantion model. Thank you
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Selective catalytic Reduction pullaiah g Siemens 3 April 17, 2019 05:49
Air vents, porosity, selective outlet Catarina CFX 0 December 26, 2008 07:59
Can Tecplot do selective blanking on grid? Others? Ben Tecplot 7 June 12, 2007 06:24
solar collector leo CFX 0 December 6, 2006 06:57
selective outlet Shane FLUENT 1 October 16, 2002 02:02


All times are GMT -4. The time now is 14:37.