CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

help on fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 13, 2008, 07:12
Default help on fluent
  #1
Sumit
Guest
 
Posts: n/a
i am working on Mixed flow compressor my objective is carried out simulation of mixed flow compressor using fluent now available boundary condition is mass flow rate at inlet and pressure outlet the pressure at outlet is more than inlet every time i do simulation it first give reverse flow at outlet but after convergence it change the value of pressure at outlet i need this pressure constant plz give me some suggestion its urgent
  Reply With Quote

Old   June 13, 2008, 08:12
Default Re: help on fluent
  #2
ravi
Guest
 
Posts: n/a
hi,

at beginning u may get rev.flow sometimes. but slowly after convergence it wil be o.k. at compressors outlet the pressure is always higher than at the inlet. so wat u got is right.
  Reply With Quote

Old   June 19, 2008, 12:59
Default Re: help on fluent
  #3
shweta suryavanshi
Guest
 
Posts: n/a
I want basics of fluent.
  Reply With Quote

Old   June 23, 2008, 08:27
Default Re: help on fluent
  #4
Ramesh. K
Guest
 
Posts: n/a
search psu.edu site where u can get them
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent in Linux vs. Fluent in Windows Melih FLUENT 6 November 16, 2014 10:39
Fluent/Unix vs. Fluent/Windows sjjaber FLUENT 10 January 5, 2005 17:58
Running FLUENT 6.0 sims. on FLUENT 6.1 ozgur FLUENT 2 April 2, 2004 13:23


All times are GMT -4. The time now is 01:10.