CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Properties for Methyl Butanoate/Butyrate needed (http://www.cfd-online.com/Forums/fluent/48608-properties-methyl-butanoate-butyrate-needed.html)

J-H Ng June 25, 2008 23:49

Properties for Methyl Butanoate/Butyrate needed
 
Dear all,

I'm having trouble locating the properties for Methyl Butanoate (or more commonly known as Methyl Butyrate) which would be used for my simulation in FLUENT.

The properties of interest is:

Methyl Butanoate liquid

1.Density [kg/m3]

2.Cp [j/kg-k]

3.Thermal Conductivity [w/m-k]

4.Latent Heat [j/kg]

5.Vaporization Temperature [k]

6.Boiling Point [k]

7.Volatile Component Fraction [%]

8.Binary Diffusivity [m2/s]

9.Saturation Vapor Pressure [pascal]

10.Heat of Pyrolysis [j/kg]

It would be of utmost helpful if anybody can send me links to site or references which contain those properties for Methyl butanoate .

Many thanks to all, Cheers Jo

J-H Ng June 26, 2008 23:20

Re: Properties for Methyl Butanoate/Butyrate neede
 
Dear all,

I have found the values for some of the properties but not all. I'll be posting some findings for those who might be needing it, meanwhile I require assistance for some other properties.

The properties of interest is:

Methyl Butanoate liquid

1.Density [kg/m3] : 898

2.Cp [j/kg-k]

3.Thermal Conductivity [w/m-k] : 0.14

4.Latent Heat [j/kg]

5.Vaporization Temperature [k]

6.Boiling Point [k] : 375

7.Volatile Component Fraction [%] : 100

8.Binary Diffusivity [m2/s]

9.Saturation Vapor Pressure [pascal]

10.Heat of Pyrolysis [j/kg]

Cheers, Jo


All times are GMT -4. The time now is 12:59.