CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Interface problem in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2008, 12:19
Default Interface problem in Fluent
  #1
John
Guest
 
Posts: n/a
In a calculation region, there are two zones: solid and liquid. The solid could not be treated as wall due to the problem requirement. I tried to treat it as interior, but warning shows the adjacient materials are different. I do not know wether Fluent could treat it as solid and liquid interface. Anyone has experience about this kind of problem?

  Reply With Quote

Old   June 27, 2008, 18:42
Default Re: Interface problem in Fluent
  #2
red lemon
Guest
 
Posts: n/a
if a solid exists next to a fluid and the nodes at the interface are shared a wall is automatically created so one has a wall and the other its shadow wall. Can only be interior if materials are the same, unless multiphase/transient problem such as for mixing.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interface problem Shahriar FLUENT 10 December 10, 2008 11:44
Interface problem gopi FLUENT 0 August 30, 2007 03:46
Interface problem sai FLUENT 1 January 19, 2007 03:26
Interface problem Tomislav FLUENT 4 May 23, 2006 01:49
Can Fluent solve free interface problem? xueying FLUENT 3 July 18, 2002 16:29


All times are GMT -4. The time now is 07:28.