CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Error during grid building (parallel version) (http://www.cfd-online.com/Forums/fluent/48784-error-during-grid-building-parallel-version.html)

Ale July 15, 2008 11:14

Error during grid building (parallel version)
 
Hi to all, do you know what could be the possible reason of this error:

Error: %si-create-grid-interface: wta(int) Error encountered in critical code section

occurring during grid building?

Thanks a lot.

Ale

umesh javiya July 15, 2008 17:40

Re: Error during grid building (parallel version)
 
do you have any boundary with interface....and have you define grid interface in define mesh.... if yes then switch on the 'Encapsulate Grid Interfaces' in Partition menu....and try it.....

zaheer July 19, 2010 02:49

i am having the same problem .............. can u help me how did u cope up with it??? partition menu didn't work........... i hv build interfaces in grid interfaces creation

enry July 23, 2010 15:35

Have you solved the problem????
I can't partition my grid. I also have some interface, and fluent report a lot of errors!


All times are GMT -4. The time now is 02:51.