CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Meshing problem in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 22, 2008, 00:56
Default Meshing problem in gambit
  #1
abhishek mukherjee
Guest
 
Posts: n/a
I am trying to construct a tubular reactor with central portion heated by a furnace with closed end flange at either ends with inert gas inlet/outlet. I am trying to construct the geometry in gambit. How to go about it. Plz help.
  Reply With Quote

Old   July 22, 2008, 05:23
Default Re: Meshing problem in gambit
  #2
krishna
Guest
 
Posts: n/a
Concentrate only the fluid region. Its a simple model. Regards
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem meshing with Gambit Adrian FLUENT 8 October 7, 2008 09:39
Gambit meshing problem David Banks Main CFD Forum 0 July 19, 2007 12:48
3D-gambit meshing problem prem FLUENT 3 February 28, 2006 03:42
GAMBIT meshing problem George FLUENT 2 October 30, 2003 09:50
meshing problem with gambit. jx FLUENT 2 June 30, 2003 05:05


All times are GMT -4. The time now is 03:59.