CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

TGrid Surface retriangulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 23, 2008, 04:08
Default TGrid Surface retriangulation
  #1
Davide
Guest
 
Posts: n/a
Hi everybody,

I have a problem with Tgrid. I have retriangulated a zone of my domain and from this new zone I built a prismatic mesh. During the retriangulation my zone loose the connections with the neighboring zones. In this way once the prismatic mesh is terminated I have a "prismatic-side" zone that overlaps the neighboring zones (if I built the boundary layer from the original surface Tgrid automatically identify the overlapping areas and create new zones). I am not able to remove the overlapping regions.

Could anyone help me?

Many thanks

Davide
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Tgrid control surface for diagnostic purposes josp OpenFOAM Meshing & Mesh Conversion 0 November 20, 2008 06:36
Tgrid wrapper surface Sam FLUENT 4 September 8, 2008 02:58
TGRID -- Retriangulation Boris FLUENT 0 March 26, 2003 04:35
Tgrid Boris FLUENT 0 April 2, 2002 21:02
how to use TGrid Ray Main CFD Forum 1 August 27, 1999 01:57


All times are GMT -4. The time now is 16:29.