CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Stationary wall and Moving wall (http://www.cfd-online.com/Forums/fluent/48890-stationary-wall-moving-wall.html)

Sri July 28, 2008 21:29

Stationary wall and Moving wall
 
hi,

in a 3d model, the outer chamber is a stationary wall & there is an internal classifier which is a moving wall & rotates at high rpm. how could i distinguish or set the boudary condition for these 2 walls. For meshing, do i need to substract the classifier unit from the overall chamber volume ? Please help. thanx.

sri

Tepin Joe July 29, 2008 04:33

Re: Stationary wall and Moving wall
 
If any wall is moving, the meshing should be a dynamic mesh. Use UDF DEFINE_CG_MOTION and represent the combined motion. Regards,



All times are GMT -4. The time now is 18:53.