CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Turbulent viscosity ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 31, 2008, 07:47
Default Turbulent viscosity ratio
  #1
khar nab
Guest
 
Posts: n/a
Hello I am simulating the flow in a cyclone using the RSM model. the cyclone contains some highly skiewed cells (0.81 max). when iterating, a message appears saying that the turbulent viscosity ratio limited to the reference value in a certain number of cells. who can explain me the meaning of this message and what could be the problem? Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
turbulent viscosity limited to viscosity ratio of Hua FLUENT 7 September 27, 2019 07:42
turbulent viscosity limited to viscosity ratio... frank FLUENT 19 December 15, 2015 23:54
turbulent viscosity limited to viscosity ratio Elizabeth FLUENT 13 December 16, 2014 09:57
Turbulent viscosity Limited to viscosity ratio Adrian FLUENT 12 September 21, 2011 05:22
turbulent viscosity limited to viscosity ratio mukkarum FLUENT 3 May 11, 2004 05:05


All times are GMT -4. The time now is 16:29.