CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Supersonic Steady Inviscid flow over a cone (http://www.cfd-online.com/Forums/fluent/49161-supersonic-steady-inviscid-flow-over-cone.html)

Kartik Bulusu September 1, 2008 21:10

Supersonic Steady Inviscid flow over a cone
 
Dear Users

I am a doctoral candidate in the Department of Mechanical and Aerospace Engineering, The George Washington University, Washington DC.

My work is primarily experimental in nature. But I am in need making some basic CFD analysis using FLUENT 3D.

I have been working with some 2D simulations, so I am aware of the basic fucntionalities in FLUENT.

The 3D problem I would like to simulate with FLUENT is a "Supersonic Steady Inviscid flow over a cone of 25 degree half angle".

Could someone point me to a 3D tutorial for GAMBIT meshing and FLUENT solver. Any alternative tutorial for 3D flows would also be helpful.

Regards Kartik

aero student March 24, 2013 18:21

Quote:

Originally Posted by Kartik Bulusu
;153129
Dear Users

I am a doctoral candidate in the Department of Mechanical and Aerospace Engineering, The George Washington University, Washington DC.

My work is primarily experimental in nature. But I am in need making some basic CFD analysis using FLUENT 3D.

I have been working with some 2D simulations, so I am aware of the basic fucntionalities in FLUENT.

The 3D problem I would like to simulate with FLUENT is a "Supersonic Steady Inviscid flow over a cone of 25 degree half angle".

Could someone point me to a 3D tutorial for GAMBIT meshing and FLUENT solver. Any alternative tutorial for 3D flows would also be helpful.

Regards Kartik


I too am facing a similar problem to this, were you able to find good tutorials? I really appreciate your help

rameshbhoraniya October 1, 2013 04:21

If you have any idea let me convey i am also seeking some information regarding simulation of cone .


All times are GMT -4. The time now is 04:06.