CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Modelling 3D elbow in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 3, 2008, 12:51
Default Modelling 3D elbow in Gambit
  #1
Karthik
Guest
 
Posts: n/a
Hey,

Can you suggest something regarding the modelling of 3D elbow in Gambit. How do we need to go about it? Which operations do we need to perform? I went through the Gambit tutorial but gives only the 2D elbow. Any ideas?

Thanx, Karthik
  Reply With Quote

Old   September 4, 2008, 07:03
Default Re: Modelling 3D elbow in Gambit
  #2
jay
Guest
 
Posts: n/a
hi karthik, simple way to do is that create the 2d face...and revolve it about it's axis..

if you have any non symmetry volumes like small tube joining in the elbow...model it separately (create the small face and sweep it till it goes inside the elbow volume) and unite with the elbow volume.

jayaveerapandian.m@gmail.com
  Reply With Quote

Old   September 4, 2008, 09:39
Default Re: Modelling 3D elbow in Gambit
  #3
Karthik
Guest
 
Posts: n/a
Thanx Jay!!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Elbow 3D with Gambit !! Walid FLUENT 3 January 16, 2014 06:09
cfd and gambit modelling craig clarke FLUENT 3 September 23, 2009 04:58
Gambit software > how to construct an elbow ? Frank FLUENT 2 September 16, 2008 10:27
Creating 3D Elbow Geometry in GAMBIT Shubha FLUENT 3 June 2, 2008 11:28
Gambit 2D modelling juliana p FLUENT 4 September 28, 2005 20:35


All times are GMT -4. The time now is 16:05.